100% Original Focus Lens In Laser Machine Parts – Aspheric Collimator Glass Lens – JIABEI
100% Original Focus Lens In Laser Machine Parts – Aspheric Collimator Glass Lens – JIABEI Detail:
Aspheric Collimator Glass Lens
1. Function: used with laser beam.
Advantages: aspheric glass lens is produced at high temperature, stable quality, laser source alignment consistency, instead of plastic lenses with general lens.
Purpose: laser focus control spot size is suitable for high temperature working place.
2. The single-layer glass lens belongs to the mold type, and all the accurate points are consistent.
3. After coating, the light source of the single-layer glass lens has a transmittance of 97% and the laser very bright The glass coating from 400nm to 1000nm can be use it.
4. The projected line of each machine is uniform and the line width is consistent, less than 1.8mm at 5M.
5. Fast and accurate assembly with laser diode.
● Aspheric Collimator Glass Lens(BB01-6.35)
● Specifications
Laser Wavelength: 430~1000nm±20nm
Effective Focal Length: 9.85mm
Penetration: ≥97%
Effectively Diameter: CA φ5.356/CA φ5.859mm
Outer Diameter: φ6.35mm + 0/-0.02
Thickness: 2.85mm±0.01mm
Packing: Vacuum Packing
● Aspheric Collimator Glass Lens(BB05-8)
● Specifications
Laser Wavelength: 400~850nm
Effective Focal Length: 22.827mm
Penetration: >98%(avg.)
Effective Diameter: CA φ7mm
Outer Diameter: φ8mm±0.005
Thickness: 2.97mm±0.005mm
Packing: Vacuum Packing
● Aspheric Collimator Glass Lens(BB06-4.5)
● Specifications
Laser Wavelength: 788~828nm
Effective Focal Length: 1.36285mm
Penetration: >98%(avg.)
Effective Diameter: CA φ2.64/CA φ2.94mm
Outer Diameter: φ4.5mm±0.01mm
Thickness: 1.8mm±0.01mm
Packing: Vacuum Packing
● Aspheric Collimator Glass Lens(BA05-3)
● Specifications
Laser Wavelength: 400~850nm
Effective Focal Length: 3.77mm
Penetration: >98%(avg.)
Diameter Range: CA φ2.4mm
Outer Diameter: φ3mm+0/-0.02
Thickness: 1.5mm±0.01mm
Packing: Vacuum Packing
Product detail pictures:
Related Product Guide:
Cooperation
Being supported by an highly developed and specialist IT team, we could give technical support on pre-sales & after-sales service for 100% Original Focus Lens In Laser Machine Parts – Aspheric Collimator Glass Lens – JIABEI , The product will supply to all over the world, such as: Mexico , Belgium , Cancun , Aiming to grow to be by far the most professional supplier within this sector in Uganda, we keep researching on the creating procedure and raising the high quality of our principal goods. Till now, the merchandise list has been updated on a regular basis and attracted customers from around the globe. Detailed data can be obtained in our web page and you'll be served with good quality consultant service by our after-sale team. They're going to allow you to get complete acknowledge about our items and make a satisfied negotiation. Small business check out to our factory in Uganda can also be welcome at any time. Hope to obtain your inquiries to get a happy co-operation.
By Kelly
from Greece
- 2018.12.05 13:53
We have been looking for a professional and responsible supplier, and now we find it.
By Danny
from Belize
- 2018.08.12 12:27
